Products

3D Scan Heads

Metric Specifications Imperial Specifications

SG2 Series Scan Heads - Metric Specifications
	SG42	SG102	SG502	SG1002
XField of View
Near	38 mm	85 mm	160 mm	210 mm
Far	49 mm	175 mm	370 mm	740 mm
Point Spacing
Near	30 µm	70 µm	130 µm	170 µm
Far	40 µm	140 µm	312 µm	580 µm
YPoint Spacing in Scan Direction	Function of scan velocity. On a typical ShapeGrabber system minimum resolution is 20µm
ZRange
Standoff*	158 mm	118 mm	225 mm	300 mm
Depth of Field	57 mm	170 mm	420 mm	800 mm
Resolution
Near	1 µm	4 µm	10 µm	20 µm
Far	2 µm	7 µm	16 µm	40 µm
Noise (1o)
Near	8 µm	15 µm	28 µm	47 µm
Far	28 µm	38 µm	87 µm	275 µm
Weight	1.08 kg	1.08 kg	1.12 kg	1.14 kg
Dimensions
Length	108 mm	208 mm	285 mm	295 mm
Width	75 mm	75 mm	75 mm	75 mm
Height	123 mm	123 mm	145 mm	141 mm
Data Rate
Minimum	18,000 points per second at nominal DOF
Maximum	100,000+ points per second at reduced DOF
Environmental
Temp.-	15 - 40°C
Temp.- Ref.	20 +/-1°C
Rel. Humidity	50 +/- 20% (Non-condensing)
Electrical
Connections	2 X 6 Pins 1394 (Fire Wire)
Voltage**	8 - 30 VDC / 12 VDC Nominal
Current**	230 mA
Laser
Device Type	Laser Diode Device
Output Power***	Maximum 0.95 mW
Class	Class II - Eye Safe
Wavelength	670 nm